Pikler Assembly Instructions

Download the paper instructions for the large or small pikler. Pikler- Assembly

Watch our step by step video guide for assembly!

 

Parts List:

Large Pikler
Allan Key x 1pc
Pivot Bolts x 4pc
2″ Screws x 28pc
3″ Screws x 6pc
Sandpaper x 1pc
Long wood legs x 2pc
Short wood legs x 2pc
Connector triangles x 2pc
Dowels with metal insert x 2pc
Dowels with no metal insert x 17pcs

 

Small Pikler
Allan Key x 1pc
Pivot Bolts x 4pc
2″ Screws x 16pc
3″ Screws x 6pc
Sandpaper x 1pc
Long wood legs x 2pc
Short wood legs x 2pc
Connector triangles x 2pc
Dowels with metal insert x 2pc
Dowels with no metal insert x 11pcs

Tips and Tricks!

Our dowels are made of hard maple. Sometimes the screws don’t want to pull in all the way or will snap. Read these below before starting. Grab a candle because you’re going to need it for the long screws.

  1. Grab a candle. Any candle, rub the threads of the screw on the candle so you get some wax buildup. Then drive it in to the dowel with two hands. It helps reduce friction and allow the screw to go in. It’s an old woodworkers trick. See the video below for a demonstration. It’s very easy to snap the long screws and your dowel will be ruined.
  2. Get all the screws in as far as possible so the structure is together. Put the pikler on the floor, on it’s side. Back the screw out just over half way. Then lean on the screwdriver with two hands and drill it back in. You may need to do that more than once.
  3. If you have a very stubborn dowel you can drill out the pilot hole with a 1/8″ drill bit. Be careful not to make it too loose, we still need the threading to grab on to the wood.
  4. Pikler is wobbly after assembly? The screws can pull too tight which can pull the unit out of square. Try backing out the screws by a half turn. It will relieve the tension and allow it to sit equally on the floor.

If you’re struggling you can message us anytime on the website.

Rocker Assembly Instructions

Download the paper instructions for the Rocker. Rocker Assembly Instructions

 

Parts List:

Side U-Shaped pieces x 2pc
Center slats x 8pc
2″ screws x 16pc

Learning Tower Assembly Instructions

Download the paper instructions for the Learning Tower. Learning Tower Assembly

 

Parts List:

Side panels x 2pc
Cross pieces x 2pc
Step x 1pc
Platform x 1pc
Dowel x 1pc
Backboard x 1pc
Sandpaper x 1pc
2″ Screws x 10pc

Toy Shelf Assembly Instructions

Download the paper instructions for the Toy Shelves.

Toy Shelf D-45

Toy Shelf D-30

Toy Shelf S-45

Toy Shelf S-30

Wardrobe Assembly Instructions

Download the paper instructions for the wardrobe.

Wardrobe

Everyday Table Assembly Instructions

Download the paper instructions for the Table and Bench set.

Table Large

Table Small

Bench Large

Bench Small

Cube Chair Assembly Instructions

Download the paper instructions for the Cube Chair.

Cube Chair

Table and Chair Set Assembly Instructions

Download the paper instructions for the Chairs.

21-01_Chair_Assembly Instruction

 

Download the paper instructions for the Table

21-01_Table Assembly Instruction

Activity Table Assembly Instructions

Download the paper instructions.

Activity Table-Assembly

Stepping Stones and Measure Me Assembly Instructions

Download the paper instructions for the Stepping Stones.

Square Stepping Stones

 

Download the paper instructions for the Measure Me Stick.

Measure Me Stick